4016/CYMRU/RH/24 - Cobot Arm Cyclic Demonstrator
UNIVERSITY OF SHEFFIELD · Yorkshire and the Humber
Key facts
- Contract value
- £264,086
- Awarded
- 26 Mar 2024
- Contract starts
- 20 Mar 2024
- Contract ends
- 31 Mar 2024
- Procedure
- Open procedure (above threshold)
- Buyer type
- Education
- Source
- Contracts Finder
Awarded to
| Supplier | Value |
|---|---|
| SP Technology Ltd, T/A SP Automation & Robotics | £264,086 |
Description
4016/CYMRU/RH/24 - Cobot Arm Cyclic Demonstrator
The University of Sheffield wishes to invite tenders for a Cobot Arm Cyclic Demonstrator on behalf of the Advanced Manufacturing Research Centre CYMRU, Chester Road, Chester, CH4 0DH
Scope of Requirement The AMRC Cymru are looking to purchase a robotic cyclic demonstrator. The primary use of the demonstrator will be as an educational piece to showcase to businesses and project partners the advantages of digital, robotics and automation technologies. However, the demonstrator will also need to act as a platform for robotics research work. The robotic demonstrator should be linked to a cobot arm.
The technologies to be shown need to include elements of: • 3D printed elements (added value components such as printed fixtures, guides, fingers grips etc.) • Robotic arm (to show how a robotic arm can add value to existing processes. This robotic arm needs to be able to disconnect from the demonstrator for the purposes of other works) • Machine vision (using computer vision to add value to the process such as, but not exclusively, inspection and data capture) • Data (data from the system needs to be able to be captured for consumption by other systems) • Dashboarding / Human machine Interfaces (Data from the demonstrator to be disseminated in human readable format).
Delivery, supply, installation and commission at AMRC CYMRU Baglan Energy Park, Central Ave, Port Talbot SA12 7AX
Tender Process and Documentation: This procurement is an open procedure.
The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://in-tendhost.co.uk/Sheffield
If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://in-tendhost.co.uk/Sheffield
Completed tenders must be returned through the same e-tendering system.
Closing date for receipt of tenders: 29th of February 2024 at 12 noon (UK time).
Please note: The University of Sheffield is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (Directive 2014/24/EU) as amended by the Public Procurement (Amendment) (EU Exit) Regulations 2020.
The University reserves the right from time to time to voluntarily operate under the Public Contract Regulations (as defined above) on a case by case basis. Otherwise, advertisement of any contract in Find a Tender Service or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.
For the avoidance of doubt, this procurement is not subject to the Public Contract Regulations (as defined above)
Additional information: All expressions of interest must be via the University of Sheffield e-tendering portal: https://www.in-tendhost.co.uk/Sheffield
This is an open tender exercise. The ITT can be downloaded by registering and expressing your interest on the University`s e-tendering system https://www.in-tendhost.co.uk/Sheffield
If you have any questions or comments in relation to this tender they must be submitted via the In-tend System, this can be accessed at https://www.in-tendhost.co.uk/Sheffield
Completed tenders must be returned through the same e-tendering system.
Closing date for receipt of tenders: 29th of February 2024 at 12 noon (UK time).
Please note: The University of Sheffield is not a contracting authority for the purposes of the Public Contracts Regulations 2015 (Directive 2014/24/EU) as amended by the Public Procurement (Amendment) (EU Exit) Regulations 2020. The University reserves the right from time to time to voluntarily operate under the Public Contract Regulations (as defined above) on a case by case basis. Otherwise, advertisement of any contract in Find a Tender Service or Contracts Finder is at the sole discretion of the University and is undertaken on a voluntary basis with no implied obligation to comply with the procurement legislation.
For the avoidance of doubt, this procurement is not subject to the Public Contract Regulations (as defined above)
Categories (CPV)
- 42997300 Industrial robots
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202627 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr