UK SBS FM16118 Constant Temperature Pump Replacement Works Invitation to Quote
UK SHARED BUSINESS SERVICES LIMITED · United Kingdom
Key facts
- Contract value
- £73,894
- Awarded
- 03 Oct 2016
- Contract starts
- 09 Oct 2016
- Contract ends
- 14 Nov 2016
- Procedure
- Open procedure
- Buyer type
- Other public body
Awarded to
| Supplier | Value |
|---|---|
| Cougar Insustries | £73,894 |
Description
The final date and time for the submission of bids is Tuesday 13th September 2016 at 11:00 am DO NOT apply directly to the buyer.
All tender information MUST be submitted through the CCS eSourcing Portal.
Brief Introduction
The Constant Temperature (primary and secondary) pumps at the National Oceanography Centre in Southampton (NOCS) are due for replacement. We have invited a pump supplier (Grundfos) to specify suitable replacements and the scope of works within this ITQ document makes reference to this suppliers products. You may tender using similar approved products from other suppliers provided that their performance is the same or exceeds the Grundfos products quoted. The Grundfos report is appended to the ITQ document. Where alternatives are proposed contractors must confirm that the pumps meet or exceed the Grundfos pumps and provide a clear payback report for the client. Note that the pumps operate in an hours run change over arrangement at fixed speed. At any one time one primary and one secondary time tends to be in operation.
Please ensure you review all attached information to ensure a full understanding of this requirement. All attachments can be found with the RFx attachments tab within the Emptoris System
This contract will be awarded based on the evaluation criteria set out in the ITQ document.
To register on our e-sourcing portal click on https://gpsesourcing.cabinetoffice.gov.uk and follow the link âRegister for CCS eSourcingâ.
To express your interest in this oppportunity email [email protected]
Additional information: DO NOT APPLY DIRECTLY TO BUYER
Full details of this opportunity can be found on the e-sourcing portal please follow instructions below.
If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'.
Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.
Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing [email protected]. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email.
Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done. The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder.
As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event. Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information.
For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk : Telephone: 0345 010 3503 Training documents to support Bidders utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section.
Categories (CPV)
Similar open tenders
Donegal County Council - Supply and Delivery of Workshop Tools and Miscellaneous Items
Location: IrelandBuyer: Donegal County Council
Open tenderCloses 2 Dec, 202627 daysValue €60.00KSource TEDSupply and Delivery of Workshop Tools and Miscellaneous Items such as socket sets, wheel alignment gauges, impact wrenches, angle grinders, welding equipment, inspection lamps, wheel removal trolleys, starter packs, trolley jacks and heat torches etc.
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.