Forum & Piries Multi Storey Car Park Replacment Lifts
Horsham District Council · South East
Key facts
- Contract value
- £325,152
- Awarded
- 06 Nov 2015
- Contract starts
- 04 Feb 2016
- Contract ends
- 04 Nov 2016
- Procedure
- Open procedure
- Buyer type
- Local government
Awarded to
| Supplier | Value |
|---|---|
| Terry Group Ltd | £325,152 |
Description
The existing lift installations at Horsham District Council car parks, Piries Place and the Forum, are to be replaced with new lifts in the existing shafts. The following is an outline of scope of works for the project: Removal and disposal of existing lift installations (2No. electric traction machine room-less type and 2No. hydraulic type). Two lifts will be worked on simultaneously to minimise project length, but only one lift in each building can be brought off line at any time. Removal and disposal works to include but not limited to the following: guide rails, lift cars, lift machines, buffers, secondary steelwork, landing doors and associated operators, landing controls and indicators, ropes, counterweights, hydraulic fluid tanks and associated pumps, control cabinets, lighting and emergency lighting, small power, containment and cabling. Existing electrical supplies shall be utilised and modified to suit the revised installations. Existing fire alarm systems shall be integrated and modified to suit the revised installations. Existing telephone lines shall be integrated and modified to suit the revised installations, incorporating 12 months provision of alarm monitoring by an Alarm Receiving Centre. Provision of 4No. new vandal resistant passenger lifts of robust construction within the existing shafts, generally to BS EN81 (or equivalent where appropriate), expected to electric traction machine room-less types incorporating regenerative braking. For the Forum provide 2No. 10 person / 800kg passenger lifts with one side being glazed to correspond with the glazed side of the lift shaft. For Piries Place, provide 2No. 13 person / 1000kg passenger lifts. The Contractor shall be responsible for designing and installing the specific lifts within the existing shafts including all necessary steelwork. All doors shall be robust, vandal resistant type in accordance with BS EN81-71 Category 2 (or equivalent where appropriate). For the Forum, the landing openings shall be widened to suit 900mm wide doors. For the Forum, automated extract ventilation shall be provided to each shaft. Also for the Forum, remedial works shall be undertaken to seal the space between the lift shaft and the curtain walling to prevent nuisance littering on each floor.
Categories (CPV)
- 42416000 Lifts, skip hoists, hoists, escalators and moving walkways
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202627 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr