Integrated bioreactor platform for rapid scale-up and translation
The University of Manchester · North West
Key facts
- Closing date
- 25 May 2023
- Contract starts
- 19 Jun 2023
- Contract ends
- 14 Feb 2024
- Procedure
- Open procedure (above threshold)
- Buyer type
- Education
Description
This tender is being run on behalf of Dr James Winterburn, Reader in Chemical Engineering. Dr Winterburn led a successful BBSRC ALERT21 equipment bid "Integrated bioreactor platform for rapid scale-up and translation", which will provide significant bioreactor capacity for microbial fermentation process development, scale up and translation for a range of bio-based chemicals. The exploitation of bio-based production routes requires a thorough understanding of production strain performance and an ability to rapidly and effectively scale processes from millilitres to tens of litres. The bioreactor platform is intended to provide understanding of how process conditions at different volumes and variability across process parameters (e.g., mixing speeds, dissolved O2, pH), affect host cell performance. The integrated bioreactor platform will bridge across three scales, outlined below, and allow for rapid process development and ultimately support research translation.
ï· Small-scale: Parallel bioreactor system (500 mL, 6 vessels) for rapid parallel process development, strain testing and parameter optimization for microbial fermentations in batch, fed-batch and continuous cultivation, with off gas analysis capability
ï· Mid-scale (3L bioreactor system, four vessels): For initial scale up and process development work (e.g., confirmation of feeding profiles, metabolic profiling) and preliminary process analysis (including; yield, productivity, final titre) with off gas analysis capability. Also serves as the seed train for inoculum preparation for scale up to 40L.
ï· Large-scale feasibility (40L SIP bioreactor): To enable in-house demonstration of process technical feasibility, production of sufficient quantities of material for application testing and benchmarking and provision of data for robust techno-economic analysis which can be used as the basis for commercialisation, also with off gas analysis capability.
Additional information: Information, formalities and necessary requirements to be met will be set out in the procurement documents, all of which are available via the University`s procurement portal In-Tend - https://in-tendhost.co.uk/manchesteruniversity
Is a Recurrent Procurement Type? : No
Categories (CPV)
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202627 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr