Coating/Dryer Equipment for UKBIC Technology Line
UK Battery Industrialisation Centre · West Midlands
Key facts
- Estimated value
- £200,000
- Engagement closes
- 07 Nov 2022
- Buyer type
- Other public body
Description
Vendors will be invited to submit a bid to provide a flexible coating and drying system to fit into a clean and dryroom. This system would need to be representative and scale-able to a larger system
A mixed slurry for anode and for cathode must be coated onto metal foils through a changeover delivery system.
⢠Machines in the range of 320mm to 640mm foil width will be considered
⢠The carrier foil is coated with the slurry by an application tool, such as a slot die. The foil can be coated continuously and/or intermittent.
⢠The foils are coated in a roll-to-roll process. The coating of the upper and lower side of the foil is realised sequentially by an additional run through the equipment unless double sided simultaneous coating is implemented as a desired option.
⢠After coating, the foil is directly passed through the dryer. Any solvent is extracted by heat and is then recovered as required e.g., NMP. The dryer is divided into different temperature zones. After drying, the electrode coils are rewound at ambient temperature.
⢠The coating machine will be installed in a dry and clean room down to -70°C dewpoint
⢠The coater/dryer should fit in a room approximately 15m long by 3m high internally by 4.6m wide
⢠Coating thickness per-side (wet) 50-300 µm and coat weight measured
⢠Coating speed range 2-10 m/min
⢠Heating range 30°C - 180°C (for all sections independently)
⢠Dryer system will be designed to handle a range of solvents typically used in lithium-ion and sodium-ion electrodes eg Water, NMP, IPA and others
⢠System will be designed to collect solvents in a condenser and entrapment system i.e., carbon bed external to the coating room
This system would need to be representative and scale-able to a larger system.
One coater/dryer machine must be procured - if budget allows, a second coater/dryer machine may be procured to separate anode and cathode coater process to avoid cross-contamination. The tenderer is encouraged to provide a quotation to suggest what savings could be made if a second coater/dryer was ordered at the same time as the first.
The equipment must offer modular solution, so equipment can be easily reconfigured or decommissioned in the future.
Bidders are encouraged to put forward next generation coating and drying technologies.
All equipment to provide UKCA conformity.
Categories (CPV)
- 31600000 Electrical equipment and apparatus
Similar open tenders
ENQ1406 - LED Screens, Staging, PA Equipment and Lighting Equipment for Derby LIVE Events
Location: East MidlandsBuyer: Derby City Council
Open tenderCloses 11 Nov, 20266 daysValue £95.00kSource Find a TenderThis quotation is for the supply, installation and de-rig of staging, LED screens, PA and Lighting equipment for Derby LIVE Events. **Please note this procurement has been reserved to suppliers with substantive business operations within the administrative boundary of Derby City Council. The Council is committed to sup
Offer trydanol a llusernau goleuadau stryd / Street lighting electrical equipment and lanterns
Location: WalesBuyer: Flintshire County Council
Open tenderCloses 25 Nov, 202620 daysValue £1.00Source Find a TenderCyflenwi lanternau goleuadau stryd newydd i Gyngor Sir y Fflint, gan gynnwys o ddanfon i gefnogaeth cynnal a chadw, adnewyddu asedau diwedd oes a/neu welliannau effeithlonrwydd ynni trwy LED a thechnoleg gyrrwr newydd. The supply of replacement street lighting lanterns for Flintshire County Council, including delivery
Life Safety System (LSS) Inspections, Servicing and Associated Maintenance, Upgrades and/or Repairs
Location: IrelandBuyer: Tuath Housing Association Ltd
Open tenderCloses 9 Dec, 202634 daysValue €5.00MSource TEDTuath Housing Association invites tenders from suitably qualified and experienced electrical contractor to undertake Life Safety System (LSS) inspections, servicing and associated maintenance, upgrades and/or repairs on selected Tuath Housing Association properties. This initiative is part of an ongoing asset managemen
Early Years Experience ”Hey Duggee’s Big Day Out“ Experience Designer
Location: United KingdomBuyer: Science Museum Group
Open tenderCloses 20 Nov, 202615 daysValue £70.00kSource Find a TenderThe Science Museum Group (SMG) wishes to award a contract for the provision of design services for the 2028 Hey Duggee experience at the Science and Industry Museum. SIM seeks to appoint a Designer to provide full design services for this experience, including 3D design and 2D design, with the option to provide lightin
WUTH-ITT-C484988 Minor, Small & Medium Works
Location: United KingdomBuyer: WIRRAL UNIVERSITY TEACHING HOSPITAL NHS FOUNDATION TRUST
Open tenderCloses 8 Dec, 202633 daysValue £40.00mSource Find a TenderThe Contracting Authority is seeking to establish a Framework for provision of minor, small & medium works across its own sites and for any other participating authority as named in the ITT. The Framework will be for a period of 12 months with the option to extend for a further 12 months (maximum duration 2 years). The
Construction, Repairs and Maintenance Framework
Location: Yorkshire and the HumberBuyer: North Lincolnshire Council
Open tenderCloses 30 Nov, 202625 daysValue £62.40mSource Find a TenderNorth Lincolnshire Council is establishing a series of Frameworks to provide flexible, compliant and commercially robust mechanisms for the delivery of construction, maintenance, repair and infrastructure services across its estate and wider asset portfolio