EAP.AWM.004 Walsall: Former IMI James Bridge Copper Works, Darlaston, Management Works to Repair and Upgrade Fencing & Surfacing, 2015

Works are required to reduce the potential for harm to trespassers and authorised users from the excavation of buried metals and uneven surfaces at the Former IMI James Bridge Copper Works, Darlaston, Walsall. Currently, trespassers are able to enter the site through broken fences and scavenge metal (slag) buried in the ground. HCA wish to quickly undertake management works to reduce the means of access to the site and stabilise the surface of the site, covering any slag materials. Previous investigations have shown the slag materials to have very low levels of ionising radiation. The HCA is seeking to appoint a competent Contractor to improve the safety and security of the Former IMI James Bridge copper works. The works comprise two principal activities: Repairing and replacing the site boundary fence - fencing at the boundary is not secure. The chain link fence has previously been repaired but several large openings currently exist for pedestrian access. To prevent the possibility of trespass, this boundary fence, where it remains shall be removed, and replaced with a new 2.1m high general purpose steel palisade fence with additional security measures and security fence fixings specified for improved resistance to vandalism. The existing gate currently locked in an open position located within the motorway underpass shall be removed and replaced with a new lockable palisade gate to prevent access to the West side of the motorway. Placing slag and asbestos below ground and re-compaction of surfaces - at several locations of the site, and particularly an area in the north west of the site, the concrete floor slab is not present to cover the underlying ground. At these locations slag waste is exposed and also potentially asbestos containing materials are located at the surface. The works will require the removal of visible fragments of asbestos containing materials by hand for disposal at a licensed facility. Slag materials are to be collected by means of mechanical excavator and placed below the installation of a cover system achieved through the import of sufficient volume of recycled aggregate to enable a cap to be laid over all of the soft surfaces. Recycled aggregates imported to the IMI site must comply with the WRAP protocol for recycled aggregates. Please refer http://www.wrap.org.uk/content/quality-protocols for further information and will be subject to testing. Works are notifiable under CDM 2015. A Principal Designer has been appointed by the Employer. The minimum level of Public & Employers Liability insurance cover needed for this Contract is £10 million and £10 million respectively. Former James Bridge IMI Copper Works will be available for viewing during the Tender. Suppliers must visit the site prior to pricing the works and will be required to confirm this within the Tender return. Works are expected to be have commenced on site by 3rd August 2015, subject to Planning Approval

Additional information: The closing time for tenders is 1pm.

Due to document file size, the Appendices in support of this Tender are provided on a Client Access Web Portal for you to access and download. To obtain the documents: • Enter the following URL into the address bar of your internet browser https://clientportal.tep.uk.com • When prompted for a username enter: Tep\tepca1 (be careful not to include a space after the username) • When prompted for a password enter: Tepca2304 Please ensure your type in the password and do not copy and paste as this will not work. So as to receive notifications of clarification questions asked by Suppliers and the Agency’s response, Suppliers must click the ‘Watch this Notice’ button on the notice within Contracts Finder to receive email notification when changes/updates are made to the notice. Please note in order to use this feature Suppliers must be registered with Contracts Finder. Suppliers wishing to tender for HCA contracts which involve physical Works or Services such as construction, demolition or building maintenance, must either be registered and assessed by a prequalification assessment scheme which is a member of SSIP (Safety Schemes in Procurement), be able to demonstrate membership of an equivalent scheme or complete a Health and Safety Questionnaire. SSIP membership must either already be in place, or be likely to be in place when Tenders are to be returned to the HCA. Therefore, it is recommended that applications should already be submitted when Suppliers submit their Suitability Assessment. Further information on SSIP and details of assessment scheme members can be found on http://www.ssip.org.uk/. Suppliers wishing to deliver these Works must be licensed by the HSE and also be members of the Asbestos Removal Contractors Association (ARCA). In addition to ARCA we also recognise ACAD (Asbestos Control & Abatement Division). All discussions, meetings and communications will be conducted in English.

The contract will be subject to English law. Tenders and all supporting documents must be priced in GBP and all payments under the contract will be made in GBP.

This procurement and award is subject to the transparency arrangements adopted by the UK Government. Please refer to the Tender Document for further information.

Suppliers are advised that the HCA is subject to the Freedom of Information Act 2000 ("The Act"). Please refer to the Tender Document for further information.

The HCA takes a zero-tolerance approach to bribery and corruption and sets high standards of impartiality, integrity and objectivity in relation to the stewardship of public funds and the management of its activities. Please refer to our Anti-bribery and Corruption Policy by visiting, http://www.homesandcommunities.co.uk/ethical-policies for further information.