22017 Cambridgeshire County Council Access Control Contract
LGSS · United Kingdom
Key facts
- Estimated value
- £560,000
- Contract starts
- 31 Mar 2023
- Contract ends
- 31 Mar 2031
- Procedure
- Open procedure (above threshold)
- Buyer type
- Local government
Description
Cambridgeshire County Council (CCC) use an access control system to control and secure access to many of its buildings and car parks around Cambridgeshire.
All staff, temporary workers, contractors and colleagues from partner organisations carry an ID / access card at all times. The access card acts as ID, with a photo being displayed in most cases. In addition the card contains a Mifare 4K chip which allows it to interface to proximity card readers at the various sites. Then, via programming within a database on an access control software system, access at various, days, times and dates, to buildings or subsets of doors within is controlled.
CCC require a powerful access control system which will allow the control of access to a card holder, a group of card holders or a visitor to its buildings and car parks. The system must be capable of grouping control requirements for a single door, group of doors, a whole building or even a set of buildings.
Within that control, we must be able to limit access times to specific dates, days, hours and minutes, including the ability to override. The system must be able to report on a violation or attempted violation of set access parameters both live and from an historic database of records using powerful and flexible reporting tools.
The control system should have the ability to interface to video control and recording. It must be able to unlock and lock doors using a scheduler of commands and should also allow an operator to make immediate changes remotely.
The database for the access system must be able to run on a virtual server located in CCC's data centre. The system should back up its own database daily and should be tuned, fast and efficient. In addition the system should have three network attached client PCs from where administration and control of the database is carried out.
We also require the system to connect at one of the client PCs to a card printer so that our operators may print and encode access cards with no delay.
For our car parks, the barrier control must be able to run space counters and also anti-pass back
At door points around the buildings, we need to use either magnet locks (internal doors) or Abloy type mechanical locks. In addition, card readers, exit buttons and emergency break-glasses. The requirement to interface to power door openers for DDA is essential.
We require a 24/7 callout service with a dedicated helpdesk and an 8 hour max call out response.
CCC currently have a closed protocol system ("Symmetry"), however we shall entertain all solutions and offerings during this forthcoming tender process.
It is envisaged that this opportunity shall go live during the Summer of 2022, with an award scheduled by early 2023.
The opportunity will be advertised on contracts Finder, Find a Tender Service, and can be accessed at https://procontract.due-north.com/Opportunities/Index?p=ea3edb62-3a92-eb11-810c-005056b64545&v=2 DN601203
Categories (CPV)
- 42961100 Access control system
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202627 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr