REF: SMART-11-AMR - Autonomous Mobile Robot
TWI Ltd · United Kingdom
Key facts
- Closing date
- 16 Feb 2023
- Procedure
- open
- Buyer type
- Other public body
- Source
- Sell2Wales archive (Open Contracting)
Description
TWI Ltd are looking to procure an Autonomous Mobile Robot (TWI Ref: SMART-11-AMR).This purchase will be made as part of an initiative known as SMART and this grant is supported through the SMART Building for Collaboration fund.Funding for this initiative is available until the 31st March 2023. It is expected that all equipment will be delivered, and payments defrayed prior to this date. TWI may decide not to proceed with a bid that cannot meet this timescale.Our requirements for this procurement are as detailed below:1. Autonomous Mobile Robot (AMR) platform fitted with six-axis collaborative manipulator arm2. Collaborative robot arm to be fitted with a generic 2 finger gripper device with minimum 140mm stroke3. AMR platform should have minimum payload of 90kg4. Omni-directional drive system, providing 0mm turning circle capability5. Capable of positioning accuracy of +/-10mm in orthogonal directions6. Fitted with lightweight (max 15kg) collaborative robot arm with circa 5kg payload and minimum 600mm reach capacity7. System to be provided complete with self-contained power / battery supply for AMR and Cobot arm and include all cables, accessories, user guides and battery charging equipment8. Must be capable of simple integration with third party software & hardware and suitable for research and development projects (i.e provided with fully open programming interface, ideally using ROS based software or alternatively compatible with C/C++)9. Both AMR and Cobot must be capable of autonomous operation based on sensor feedback using ROS based software and open programming interface10. Ability to integrate camera / lidar / QR code recognition for positioning & navigation11. All devices to be CE marked and suitable for operation with UK domestic voltage supply
(WA Ref:128770)
Categories (CPV)
- 42997300 Industrial robots
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202628 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202614 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202637 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202635 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202626 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202628 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr