3136.526.LT.RAPD.21 Supply of a Containment Solution
UNIVERSITY OF SHEFFIELD · Yorkshire and the Humber
Key facts
- Closing date
- 08 Dec 2021
- Contract starts
- 03 Jan 2022
- Contract ends
- 03 Jan 2029
- Procedure
- Open procedure (below threshold)
- Buyer type
- Education
Description
The University of Sheffield wishes to invite tenders for design and production of a containment solution for a Grob G550T machine tool on behalf of the Advanced Manufacturing Research Centre, Castings Group at Catcliffe, South Yorkshire.
Scope of Requirement The design and production of a containment solution for a Grob G550T machine tool to allow for machining to occur within an argon atmosphere. The solution should be able to contain the machine tool and additional related equipment (e.g. a swarf conveyor) and as such will have an approximate internal volume of 6400 x 2900 x 3320 mm. The containment area should be capable of achieving a 50ppm oxygen content and should include sensors to monitor oxygen, argon and moisture levels within the containment and enable the detection of any leaks of the containment area (resulting in either unplanned argon egress or oxygen ingress into the containment area). The bag should be capable of holding the argon under slight positive pressure (e.g. 1.2 bar) and should include a relief valve system to prevent catastrophic failure of the bag in the event of an over pressurisation.
Tender Process and Documentation: This procurement is conducted in accordance with the Defence and Security Public Contracts Regulations 2011. An NDA will need to be signed before the ITT is released via tracked and signed for mail. The Non Disclosure Agreement (NDA) will need to be completed and returned via the in-tend system https://in-tendhost.co.uk/Sheffield. You will need to complete the contact detail form and return with the NDA for the ITT to be sent via tracked and signed for mail, this will be an encrypted USB. Any queries regarding this Invitation to Tender should be submitted through the University's e tendering system https://in-tendhost.co.uk/sheffield via the Correspondence facility.
Additional information: An NDA will need to be signed before the ITT is released via tracked and signed for mail. The Non Disclosure Agreement (NDA) will need to be completed and returned via the in-tend system https://in-tendhost.co.uk/Sheffield.
Delivery Notes
AMRC Sheffield
Is a Recurrent Procurement Type? : No
Categories (CPV)
Similar open tenders
Donegal County Council - Supply and Delivery of Workshop Tools and Miscellaneous Items
Location: IrelandBuyer: Donegal County Council
Open tenderCloses 2 Dec, 202627 daysValue €60.00KSource TEDSupply and Delivery of Workshop Tools and Miscellaneous Items such as socket sets, wheel alignment gauges, impact wrenches, angle grinders, welding equipment, inspection lamps, wheel removal trolleys, starter packs, trolley jacks and heat torches etc.
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.