UK SBS FM17008 Variable Pressure Chilled Water System Project

The final date and time for the submission of bids is 30th January 2017 at 11:00am DO NOT apply directly to the buyer.

All tender information MUST be submitted through the CCS eSourcing Portal.

Brief Description of the Works

Installation of new PICT Chiller Pipe Work valves and will include modification of the existing Pipe Work Insulation where necessary.

Programming the works will be arranged in conjunction with NOC Estates. The AHUs can be left operational though consultation with the end user regarding potential slight room temperature rise during the valve replacement works would be advisable.

Contractors should allow for validation of the existing Chilled PICT Valves, and commissioning of the New Valves and Actuators.

Contractors should include within their quotation for Matrix Control Engineers to undertake the BMS disconnection and re-connection to the valve actuators, including additional control wiring where necessary.

Commission and test the new valves and actuators.

All of the works are to be completed in line with the specification.

Full specification details are available in the ITQ

Please ensure you review all attached information to ensure a full understanding of this requirement. All attachments can be found within the RFx attachments tab within the Emptoris System.

To register on our e-sourcing portal click on https://gpsesourcing.cabinetoffice.gov.uk and follow the link 'Register for CCS eSourcing'.

To express your interest in this opportunity email [email protected]

Additional information: DO NOT APPLY DIRECTLY TO BUYER Full details of this opportunity can be found on the e-sourcing portal please follow instructions below. If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'. Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so. Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing [email protected]. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email. Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done. The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder. As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event. Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information. For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk : Telephone: 0345 010 3503 Training documents to support Bidders utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section.