Powder Bed Multi Printhead Inkjet Printer (reRun Itt915)

Bespoke multi print head system required to be installed in our clean room, for research purposes, to process pharma related non-standard materials. The system must be capable of satisfactorily completing the following customer site acceptance tests:-

Powder bed feeding and recoating test: Standard selective laser sintering nylon powder will be used for this test and added into the powder feeding chamber. The machine need to be able to automatically feed and spread powder onto the building stage uniformly and repeatedly. The layer thickness for each layer of powder is preferably reach 150µm or below.

Multi-printhead printing test: Two different standard coloured inks will be used. The machine will need to be able to uniformly and repeatedly print the two different inks onto the powder bed and the dimension accuracy of the printed pattern is preferable to reach 100 µm or below.

Multi-printhead and multi-layer printing test: With the selected powder and standard coloured inks in the previous two tests, the machine shall be able to read the designed patterns from the target folder and selectively print the different inks onto the designed location. A multi-layer printing that contains up to 100 cycles of printing and powder recoating will be carried out to test the machine's printing stability.

Additional information: TENDERERS MUST EXPRESS THEIR INTEREST THROUGH FIRST REGISTERING ON THE UNIVERSITY`S E-TENDERING SYSTEM https://in-tendhost.co.uk/universityofnottingham/ Non-compliant expressions of interest (EOI) will not be considered or acknowledged. The university reserves the right to cancel the tender process at any stage. The University does not accept any liability for any costs incurred in tenderingEXPRESSIONS OF INTEREST CLOSE: 04 December 2014

To EXPRESS INTEREST: Please first register on the eTendering system then Login and go to Tenders. Find the project scroll down to View Details and then scroll down to the Express Interest` button at the foot on the right hand side.

NOTE: To make sure you receive our email notifications. to ensure our emails reach your inbox please add our email domain @in-tend.co.uk to your safe senders list and check your spam filter settings.. Once you have registered, log-in and go to Current Tenders/view printable details, then expressed interest in the project. Once you have registered, expressed interest in the project AND your EOI will be accepted and an email will automatically be sent notifying you (to the inserted publish email address at point of registration) that it has been accepted and a second email notifying you that the documents have been published to your site under `My Tenders`. Internet Explorer (not Mozilla Firefox) should be used and pop ups must be allowed. All correspondence relating to this project should only be made through the e-Tendering web site. Click on CREATE NEW CORRESPONDENCE once you have logged on to the Web site and follow the instructions. Select send message via web option rather than `by email` option as this is received by the host company not directly to UoN. HELP?: Should you encounter any problems with using the Web site (including if you get locked out), contact the In-Tend Help Desk on 0844 272 8810 [email protected]

Is a Recurrent Procurement Type? : No