UK SBS FM17173 Mastic Joint Replacement Works
UK SHARED BUSINESS SERVICES LIMITED · United Kingdom
Key facts
- Contract value
- £57,672
- Awarded
- 07 Dec 2017
- Contract starts
- 15 Dec 2017
- Contract ends
- 05 Feb 2018
- Procedure
- Open procedure (below threshold)
- Buyer type
- Other public body
Awarded to
| Supplier | Value |
|---|---|
| LST PARTNERSHIP LLP | £57,672 |
Description
The final date and time for the submission of bids is 23/11/2017 at 15:00
DO NOT apply directly to the buyer.
All tender information MUST be submitted through the CCS eSourcing Portal.
National Oceanography Centre (NOC) has a requirement to replace internal expansion mastic joints at node 9 of the Southampton site. The need to undertake this project was recommended during a site condition survey undertaken by NOC in 2016. Tenders are invited from suitably qualified and experienced Principal contractors to undertake and complete the works detailed as part of this Scope of Works. The project involves the replacement of internal mastic joints within Area 494, plus the replacement of the primary (internal) movement joints through the full intersection of Nodes 4 and 9 of the structural frame. Area 494 comprises a single central corridor, with a series of self-contained rooms to each side - as indicated on the following reference plan. The rooms are generally fitted out as offices, but some (Rooms 494/01, 494/02, 494/12 and 494/18) are fitted out as laboratories. The scope of this survey is to check the condition of the internal mastic joints in Area 494 of the NOC main building, and to give recommendations for repair or replacement as appropriate. The survey was carried out by representatives of William Attwell & Associates on 21 September 2017. Samples of the mastic joint materials were taken from Rooms (494) 03, 06, 07, 10, 14, 15, 16, 17, 19, 20 and corridor 494/100. The remaining rooms and laboratories were subject to a visual inspection only.
A full specification can be seen attached to this tender.
Please disregard any content in this notice that requests your organisation "to apply directly to the buyer" as this unfortunately a system generated error, that is outside of the Contracting Authorities control
Additional information: DO NOT APPLY DIRECTLY TO BUYER
All submissions will be assessed in accordance with the Public Contracts Regulations 2015, for procurement values that exceed Regulation 5 (Threshold amounts)
Responses must be received by the date in the bid documents.
Responses received outside or concurrently using the eSourcing process will not be accepted or considered further for this opportunity.
Please disregard any content in this notice that requests your organisation "to apply directly to the buyer" as this unfortunately a system generated error, that is outside of the Contracting Authorities control
How to Register on the CCS eSourcing Suite
Full details of this opportunity can be found on the e-sourcing portal please follow instructions below. If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'.
Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.
Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing [email protected].
Your email must clearly state: ⢠name and reference for the procurement you wish to register for; ⢠name of the registered Bidder; ⢠name and contact details for the registered individual sending the email.
Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done. The Sourcing documents can then be accessed on the eSourcing Suite at: https://gpsesourcing.cabinetoffice.gov.uk using the instructions detailed in the Specification documents within Contracts Finder.
As a user of the e-Sourcing Suite you will have access to Emptoris email messaging service which facilitates all messages sent to you and from you in relation to any specific RFX event.
Please note it is your responsibility to access these emails on a regular basis to ensure you have sight of all relevant information.
For technical assistance on use of the e-Sourcing Suite please contact Crown Commercial Service Helpdesk: Telephone: 0345 010 3503
Training documents to support Bidders to utilise Emptoris CCS eSourcing are available in the Contracts Finder Tender documents section.
Categories (CPV)
Similar open tenders
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.
ITT - Security Turnstiles, Roller Shutters, Automatic Doors & Access Control Maintenance Service
Location: South WestBuyer: New College Swindon
Open tenderCloses 2 Dec, 202627 daysValue £80.00kSource Find a TenderNew College Swindon is seeking to appoint a suitably qualified and experienced contractor to provide planned preventative maintenance (PPM), reactive repairs and emergency call-out support for security turnstiles, roller shutters, automatic doors and associated access control systems across its North Star and Queens Dr