UK SBS FM150093 Air Shower for Mary Lyon Centre
UK SHARED BUSINESS SERVICES LIMITED · United Kingdom
Key facts
- Closing date
- 15 Nov 2015
- Contract starts
- 16 Nov 2015
- Contract ends
- 31 Mar 2016
- Procedure
- Open procedure (below threshold)
- Buyer type
- Other public body
Description
*** This tender requirement was abandoned prior to a Contract award decision. ***
1. Introduction & Background Currently the Mary Lyon Centre has two air showers and for the number of staff, which need to access and egress the facilities at peak times (lunch, start/ end of shifts, etc.). This is a bottleneck and impacts on the operation of the facility. The additional Air shower is providing relief from this situation and some future proof for potential increase in operations and staff. 2. Scope The scope of this opportunity includes: ⢠Design of the air shower including all relevant alterations required to the relevant change / entry area at the Mary Lyon Centre (architecturally, M&E, etc.) ⢠Supply and installation of the air shower ⢠Commissioning and Handover ⢠Provision and handover of all relevant documentation, certifications and O&M manual ⢠Training of the users Please note that we are expecting the chosen supplier to Design, Manufacture and Install the new Air Shower, MRC will then be completing the making good of the overall area, therefore we will NOT be requiring you to cost for this element 3. Technical Specification The air shower should be an independent, re-circulating unit requiring no connection to ducts and the mechanical system of the building and should not have any impact on the ventilation of the existing room. The Unit should have a single door each side and be fitted with an adjustable fan to push air through HEPA filters with an efficiency of 99.995% MPPS in accordance with EN1882 or equivalent. Specific requirements: ⢠Air velocity minimum of 100sec ⢠Power consumption per cycle 0.08kWh or less ⢠Heat emission to environment to be minimal (>80watt) with exhaust air ⢠Safety stop on inner and outer side ⢠Prepared for decontamination with Vaporised Hydrogen Peroxide VHP (Steris and/or Bioquell equipment or equivalent) ⢠Time delay to be set in and activated in a PLC with password. Programme and the settings only accessible while door closed. During operation of the air shower the door shall be locked. Alarm trigger if air shower does not operate properly (e.g. reduced airflow). During a power cut off and/or activating the safety switches, the door lock is set in open mode and stay in that way until the safety switches are restored. A display placed inside the chamber shall show remaining time. ⢠Red/green light signals outside the door for indication of work status ⢠Exhaust air 50-100 m3/h
Additional information: UK Shared Business Services eSourcing
As part of the strategic alliance between UK Shared Business Services Ltd (UK SBS) and Crown Commercial Service (CCS), UK SBS can use the CCS eSourcing Suite for future procurements.
If you have not yet registered on the eSourcing Suite, this can be done online at https://gpsesourcing.cabinetoffice.gov.uk by following the link 'Register for CCS eSourcing'. Please note that, to register, you must have a valid DUNS number (as provided by Dun and Bradstreet) for the organisation which you are registering, who will be entering into a contract if invited to do so.
Once you have registered on the eSourcing Suite, a registered user can express an interest for a specific procurement. This is done by emailing [email protected]. Your email must clearly state: the name and reference for the procurement you wish to register for; the name of the registered Bidder; and the name and contact details for the registered individual sending the email. Crown Commercial Service will process the email and then enable the Bidder to access the procurement online via the e-Sourcing Suite. The registered user will receive a notification email to alert them once this has been done
This bid will close on 16/11/2015 at 11:00am
Categories (CPV)
Similar open tenders
Acquisition, Hire and Servicing and Repair of Manual Handling Equipment
Location: LondonBuyer: Ministry of Justice
Open tenderCloses 1 Dec, 202626 daysValue £1.84mSource Find a TenderProvision of Manual Handling Equipment for public prisions across England and Wales. These contracts will cover a range of manual handling equipment typically used within our operations such as forklifts, mobile elevating work platforms (MEWPS), pallet trucks, tugs and an option to hire equipment. This equipment suppor
Door Entry Phased Replacement Programme 2026-27
Location: LondonBuyer: London Borough of Hillingdon
Open tenderCloses 2 Dec, 202627 daysValue £200.00kSource Find a TenderThe London Borough of Hillingdon (LBH) intends to install/upgrade the Door Entry/Access Control to 40 low and medium rise blocks. This work will be based on a planned program. The works include, but not limited to the design, supply, installation, commissioning and hand-over of complete and fully functional audio door
Crane Provision Framework
Location: South EastBuyer: KBS Maritime Ltd
Open tenderCloses 3 Dec, 202628 daysValue £4.00mSource Find a TenderKBS Maritime is seeking to establish a multi-supplier Framework for complete third-party crane services in support of Alongside Services operations. The Framework will supplement, not replace, KBS internal Heavy Lift capability and will provide planned surge, operational resilience, out-of-hours support, concurrent-lif
Donegal County Council - Supply and Delivery of Workshop Tools and Miscellaneous Items
Location: IrelandBuyer: Donegal County Council
Open tenderCloses 2 Dec, 202627 daysValue €60.00KSource TEDSupply and Delivery of Workshop Tools and Miscellaneous Items such as socket sets, wheel alignment gauges, impact wrenches, angle grinders, welding equipment, inspection lamps, wheel removal trolleys, starter packs, trolley jacks and heat torches etc.
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen