Arboricultural Supply - Arboricultural Supply - Machinery

The initial technical requirements are as follows : Machinery spec: 2 x 100HP Tractor with air con cab on turf tyres, 1 x Trimax Pegasus 493 mower 1 x 7 gang road towable Hydraulic Cylinder mower 1 x 60" commercial out front mower, 4WD 1 x Amazone profihopper 1250 smartcut 4WD 1 x Amazone 1.8M Flail collector 1 x 4WD fully electric ATV with Lithium Ion Batteries and cage sides 1 x Battery golf cart with utility buck 1 x seasonal service package with breakdown assistance for above machines 28.8 weeks

1.0 The functional requirements are as follows:

1.2 All machinery must be:

• legal to be on the road • suitably taxed • have all warning beacons and light boards fitted before delivery • of a very good condition upon delivery (will be agreed upon delivery by a relevant council officer) • have all modern safety features included plus additional safety options fitted where possible. • no older than 3 years at the start of the leasing period unless otherwise agreed by a council officer • must come with the relevant daily / weekly check sheets / log books for Haringey staff to complete as required • be provided with all relevant safety information, including vibration (HAVS and WBV) and noise levels'. As specified on point 3.7.2, all documents are distributed to all relevant employees of Haringey. • ensure all machinery is in compliance with the FOR's scheme and current emission level restrictions for the London area. . 1.3 Repairs and Maintenance Expectations The repair and maintenance service must include the following points. • All Annual / Bi Annual Servicing needs of Machinery • Provision for Puncture Repairs & Roadside Recovery • Cover of all Fair Wear and Tear of items

1.4 Scheduled Servicing of Equipment: 1.4.1 A scheduled servicing of equipment is to completed at least once over the term of the leased period this must be pre arranged between the contractor and a council officer to ensure minimum downtime. 1.5 Scheduled servicing should be carried out on the date and time agreed on site with minimal impact to service delivery. 1.6 Repairs and Breakdowns 1.6.1 All Repairs or Breakdowns of machinery should be completed within 24 hrs of notification from the Council to the Contractor. 1.6.2 If repairs on site are not achievable within a 24 hr period a replacement (like for like) piece of machinery must be in place within the next 24 hrs. Thus a turnaround of 48 hrs maximum is allowed. 1.5 Operator Misuse 1.7.1 The council will be responsible for operator abuse upon agreement of damage with a council officer If a breakdown is deemed to be the result of abuse by Haringey Council staff, 1.7.2 A fixed price estimate must be provided to the authority for approval prior to undertaking any works. 1.8 Induction and Inspections 1.8.1 The Contractor will ensure Haringey staff are inducted on the vehicle checks on the day of delivery. 1.8.2 The Contractor must ensure that a company representative is available on the day of delivery to induct Haringey Staff on the operation and safe working practices of the machinery. 1.9.3 The Contractor will ensure they have a representative present on the day of delivery to inspect and sign over the hire machinery to a Council Officer. Any previous or existing damage will be noted and recorded for future reference at this point. 1.10 Hire Terms 1.10.1 Any Off Hire of Machinery or any change in Machinery Requirements by the Council will be confirmed by a council officer with 5 working day's notice. 2. Evaluation of Tenders Tenders will be evaluated on a best Price basis, the successful contractor will commit to complying with all the requirements listed in the specification. Failure to do so will result in exclusion from the evaluation process. This opportunity has been distributed on adamprocure.co.uk