Supply and Install of electrical clean steam generator (NIBF1)
CENTRE FOR PROCESS INNOVATION LIMITED · North East
Key facts
- Contract value
- £55,425
- Awarded
- 25 Mar 2026
- Contract starts
- 26 Mar 2026
- Contract ends
- 25 Mar 2029
- Procedure
- Below threshold - without competition
- Buyer type
- Utilities & transport
- Source
- Find a Tender
Awarded to
| Supplier | Value |
|---|---|
| BMM Weston | £55,425 |
Description
CPI’s National Industrial Biotechnology Facility (NIBF1) is a pilot plant containing a range of bioreactor scales from 10L to 750L. This specification is for the purchase of an electrical clean steam generator suitable for supplying clean steam to the facility both for sterilisation of equipment through Steam In Place (SIP) cycles, and for heating utility. The constraints are the steam generator must be powered by an electrical supply equal to or less than 200amp. It must be of hygienic design constructed from 316 stainless steel and fed by demineralised water produced through reverse osmosis, to produce lean steam of suitable quality for condensing on to food grade surfaces. It must produce steam at a rate greater than 175 kg/hr at 3 barg, for continuous 24/7 steam availability. It must be suitable for locating inside the main facility plant room where operation of bioreactors is carried out and must not require a dedicated boiler house/room.
Categories (CPV)
- 42924720 Decontamination equipment
Similar open tenders
Donegal County Council - Supply and Delivery of Workshop Tools and Miscellaneous Items
Location: IrelandBuyer: Donegal County Council
Open tenderCloses 2 Dec, 202627 daysValue €60.00KSource TEDSupply and Delivery of Workshop Tools and Miscellaneous Items such as socket sets, wheel alignment gauges, impact wrenches, angle grinders, welding equipment, inspection lamps, wheel removal trolleys, starter packs, trolley jacks and heat torches etc.
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.