Provision of replacement Crane Gantry Cabs
LondonEnergy Ltd · United Kingdom
Key facts
- Contract value
- £290,000
- Awarded
- 02 Aug 2026
- Contract starts
- 21 Aug 2026
- Contract ends
- 31 Dec 2026
- Procedure
- Open procedure
- Buyer type
- Local government
- Source
- Find a Tender
Awarded to
| Supplier | Value |
|---|---|
| WH Scott & Son (Engineers) Ltd | £290,000 |
Description
The contract value published in the original UK6 Contract Award Notice was incorrect due to an administrative error. The correct contract value is £290,000 excluding VAT 2. The Service 2.1 The Contractor shall provide the following service to the Client for the duration of the service period: 2.2 Design of x3 replacement gantry crane operator cabs 2.3 Fabrication of x3 cabs once design approved 2.4 Replacement/installation of x3 cabs once fabricated 2.5 Commissioning of x3 cabs once installed. Cab Specification:- Construction of 3 mm steel plate. Internally reinforced with steel profiles and lined with 0.7 mm galvanized, plastisol-coated steel plate on walls and ceiling. 250 mm raised floor for cable routing. Steel plate floor covered with profiled rubber mat. Walls and ceiling insulated with 45 mm mineral wool. All windows made of 6 mm green tint toughened safety glass. Floor window without tint Incl. document holder and coat hook Surface treatment - C3H 180 μm: Entrance door with full window made of 6mm toughened safety glass, green tint Additional glass in side and rear made of 6mm toughened glass, green-tinted Terminal cabinet including door and mounting plate, L x W x H = 400x185x1800mm Light fixture LED 16.8W, 230V, 50/60Hz Light and socket Air-con split system 230V, 50/60Hz Cooling capacity 3,5 kW / 11942 BTU/h Heating capacity 4,0 kW / 13648 BTU/h Operating temperature -20°C til +46°C Filter box consisting of HEPA dust filter, carbon filter, 2Kw heater and fan blower and 4 meter air hose Operator seat SCS BL Fabric, complete Mechanical Suspension Joystick consoles 150x450mm Padded arm rests Vinyl head rest Turntable, with lock 2 pcs joystick's 4 steps in 4 directions Push button grab operation Push button for start and 1 pc. emergency stop All mechanical mounted only
Categories (CPV)
Similar open tenders
Donegal County Council - Supply and Delivery of Workshop Tools and Miscellaneous Items
Location: IrelandBuyer: Donegal County Council
Open tenderCloses 2 Dec, 202627 daysValue €60.00KSource TEDSupply and Delivery of Workshop Tools and Miscellaneous Items such as socket sets, wheel alignment gauges, impact wrenches, angle grinders, welding equipment, inspection lamps, wheel removal trolleys, starter packs, trolley jacks and heat torches etc.
Tender 23/2026 - SUPPLY AND DELIVERY OF WORKSHOP TOOLBOXES COMPLETE WITH TOOLS
Location: Northern IrelandBuyer: Newry, Mourne and Down District Council (NMD)
Open tenderCloses 2 Dec, 202627 daysSource Find a TenderNewry, Mourne and Down District Council invite suppliers to tender for the provision of a total of 10 toolboxes complete with tools. This is to equip the workshop personnel with the appropriate tooling to maintain Council vehicles, plant, and equipment to a high standard in line with industry guidelines and statutory r
Testing, Maintenance, Servicing and Repair of Air Compressors and Ancillary Compressed Air Equipment
Location: Yorkshire and the HumberBuyer: City of Bradford Metropolitan District Council
Open tenderCloses 18 Nov, 202613 daysValue £75.00kSource Find a TenderThe Council has an estate of approximately 450 properties across the district covering a range of property types including (but not limited to) offices, schools, libraries, leisure centres, residential homes, private residences and commercial premises. All bidders shall note that due to the Councils property realignmen
Procurement of Fibre Laser Cutter RQ0000106168
Location: South WestBuyer: Defence Science and Technology Laboratory
Open tenderCloses 11 Dec, 202636 daysValue £336.00kSource Find a Tenderthe procurement, installation and commissioning of a Fibre Laser Cutter to supplement the existing Waterjet Cutter. The new capability will improve manufacturing reliability, increase productivity, reduce operating costs, and ensure continued support to critical defence programmes
Adiabatic Compressed Air Energy Storage (A-CAES) Demonstrator Plant
Location: United KingdomBuyer: Energy Coast West Cumbria Ltd (t/a BEC)
Open tenderCloses 9 Dec, 202634 daysValue £1.60mSource Find a TenderEnergy Coast West Cumbria Limited, trading as BEC, invites tenders for the design, manufacture and supply of a factory-integrated, modular Adiabatic Compressed Air Energy Storage (A-CAES) demonstrator plant for the BEST CAES project at Westlakes Science Park, West Cumbria. The requirement comprises an above-ground, tra
Framework for CNC Machines and Related Services
Location: South EastBuyer: UK Atomic Energy Authority
Open tenderCloses 30 Nov, 202625 daysValue £1.50mSource Find a TenderThe UK Atomic Energy Authority has a requirement for a framework agreement for the supply, installation, commissioning, repair and maintenance of CNC Machines. Further details are available within the Invitation to Tender which is available from the link in this notice.