Skip to content
Tenfell
Other public body

NE1 PROCUREMENT SERVICES LIMITED

Open tenders
0
Upcoming
0
Contract awards
22
Expiring in 18 months
0

Contract awards

  • 1054 - Framework for the Supply Installation and Commissioning of Gas Pycnometer

    Awarded contractPublished 14 Jan, 2019Value £181.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI are looking to establish a framework for the Supply, Install and Commissioning of a Gas Pycnometer across all CPI sites. As this is a tender to establish a Framework Agreement for the on-going supply of this type of equipment, our requirements are

    Awarded to ANTON PAAR LTD

  • 1055 - Framework for the Supply, Installation and Commissioning of Planetary Ball Mills

    Awarded contractPublished 6 Dec, 2018Value £181.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; This tender is to establish a framework of suppliers to Supply, Install and Commission Planetary Ball Mills across all CPI sites. As this is a tender to establish a Framework Agreement for the on-going supply of this type of equipment, our requirement

    Awarded to C. GERHARDT UK LIMITED

  • 1047 - Framework for the Supply, Installation and Commissioning of Multifunctional Dispensing Robots

    Awarded contractPublished 6 Dec, 2018Value £181.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; This tender is to establish a framework of suppliers to Supply, Install and Commission Multifunctional Dispenser Robots across all CPI sites. As this is a tender to establish a Framework Agreement for the on-going supply of this type of equipment, our

    Awarded to CYGNET ELECTRONICS LIMITED

  • 726 - Ongoing Servicing and Support for Equipment at CPI's Biologics Platform

    Awarded contractPublished 4 Dec, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; Servicing and Support for Equipment at CPI's Biologics Platform. This is split into 5 lots: Lot 1 - Ongoing servicing and software/hardware for Environmental Monitoring System including MetOne Mobile airbourne particle counter. Lot 2 - Ongoing Servici

    Awarded to PHARMAGRAPH LTD, BIOQUELL UK LIMITED, CROWTHORNE HI-TEC SERVICES LIMITED

  • 1037 - Ammonia Line Installation on TFS500 ALD

    Awarded contractPublished 14 Nov, 2018Value £50.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI's Beneq TFS500 ALD reactor has an additional requirement for a process that requires Ammonia gas. The equipment is based at CPI's Printable Electronics facility. This specification outlines a design for an Ammonia delivery system. An ammonia bottl

    Awarded to Northern Engineering Solutions

  • 720 - Computational Fluid Dynamics (CFD) Software

    Awarded contractPublished 1 Nov, 2018Value £144.00Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; You are invited by the Centre for Process Innovation Limited to submit a tender for the supply of a Computational Fluid Dynamics (CFD) Software package, as described in the Tender Documentation. We are posting this tender notice on behalf of The Cent

    Awarded to Siemens Industry Software Ltd

  • 1033 - Design, Supply and Installation of Containment Isolators

    Awarded contractPublished 22 Oct, 2018Value £181.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; A number of current and future projects at CPI's National Formulation Centre (NFC) require the handling of active pharmaceutical ingredients within laboratories. Because of the project-based, open access nature of our NFC facility, flexible film conta

    Awarded to Solo Containment

  • 722 - Autoclaves Servicing Framework

    Awarded contractPublished 17 Oct, 2018Value £17.04kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; You are invited to submit a tender for the establishment of a framework agreement for the servicing of Autoclaves as set out in the attached documentation. Please visit https://ne1procurementservices.com for further information. Additional informati

    Awarded to MMM Medical equipment UK LTD

  • 715 - Medtech Consultancy Framework

    Awarded contractPublished 6 Sept, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; The use of photonics in healthcare is a growing market, exploiting the advances and demands for imaging techniques, novel diagnostic tools and therapeutic techniques. In 2017 CPI was awarded funding from the European Regional Development Fund (ERDF) t

    Awarded to York Healthcare Economics Consortium Ltd, Newcastle Upon Tyne Hospitals, Morris Healthcare Consulting Ltd

  • 718 - Tube Furnace

    Awarded contractPublished 22 Aug, 2018Value £50.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI requires an "off the shelf" (i.e. non-bespoke) split tube furnace capable of a maximum temperature of 1,200°C and an operating temperature up to 1,100°C. The furnace should be equipped with replaceable quartz tubes and capable of operating under

    Awarded to Carbolite Gero Ltd

  • Supply, Installation and Commissioning of an Atomic Force Microscope

    Awarded contractPublished 20 Aug, 2018Value £400.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; Atomic Force Microscopy (AFM) is a surface profiling technique which allows the topography of nanostructured surfaces to be mapped. Primarily AFMs are used for surface profiling and particle sizing however a series of secondary modes can provide maps

    Awarded to Bruker France SAS

  • 716 - Extruder Add On (Haul Off)

    Awarded contractPublished 16 Aug, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI require a haul off unit in order to upgrade the capability of the existing Thermofisher twin screw extruder. This Unit needs to be used to ensure continuous production of tapes and fibres to a constant given thickness or diameter. The rolls are he

    Awarded to Thermo Electron (Karlsruhe) GMBH

  • 712 - Atomic Layer Deposition TFS500 Upgrades

    Awarded contractPublished 10 Aug, 2018Value £181.30kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI is looking to expand their Atomic Layer Deposition (ALD) capabilities by upgrading current Beneq TFS500 system to take advantage of high boiling temperature liquid and solid precursor source system, ammonia gas as reactant and additional inert pro

    Awarded to Beneq OY

  • Ellipsometric Spectrometer

    Awarded contractPublished 10 Aug, 2018Value £150.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI Limited are looking for the Provision of an Ellipsometric Spectrometer. Please refer to the attached tender documents for the full specification and supporting documents. Please visit https://ne1procurementservices.com for further information. A

    Awarded to SemiMetrics

  • Pharmaceutical Standard Mills

    Awarded contractPublished 10 Aug, 2018Value £85.00kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; Granulation or agglomeration, the process of size enlargement, is a very common process operation across industry ranging from fertilisers to pharmaceuticals. Wet granulation can enhance flow properties of pharmaceutical powder blends. This can be pa

    Awarded to Ytron-Quadro (UK) Ltd

  • Provision of PROSPECT Data Analysis Software

    Awarded contractPublished 7 Aug, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the provision of a suite of process and product data visualisation, analysis and modelling tools designed to understand and reduce process variability. The tools must seamlessly integrate into a typical manufacturing digital environment (Programable Logic Controllers

    Awarded to Perceptive Engineering Limited

  • 711 - Supply, Installation and Commissioning of a Freeze Dryer

    Awarded contractPublished 3 Aug, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI's Formulation platform has a requirement for a freeze dryer for lyophilising aqueous based emulsions of suspended nano and micro-particles for applications in various industries. The scope of this contract will also include the supply of consumabl

    Awarded to SciQuip Ltd

  • Thermomechanical Analyser

    Awarded contractPublished 3 Aug, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; This tender is for a thermomechanical analyser (TMA) that would be capable of precisely measuring dimensional change in materials as a function of time and temperature to identify phase changes, sintering or softening for example. The instrument must

    Awarded to Perkin Elmer LAS (UK) Ltd

  • 717 - Framework for Safety Advisors

    Awarded contractPublished 25 Jul, 2018Value £181.30kSource Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; CPI are looking to establish a Framework of Advisors to provide expert contribution to the development of safe working practices in the handling and preparation of potent and highly potent drugs and medicines through: - Facility and equipment design -

    Awarded to HPAPI Project Services Limited, BPE Design and Support Ltd

  • Economist Framework

    Awarded contractPublished 11 Jul, 2018Source Contracts Finder archive

    The Centre for Process Innovation Ltd (CPI) requires the following; In 2017, CPI established a Performance and Impact team to measure, analyse and evaluate the impact of its support on the companies it assists through public and private projects. To enhance the activities of this team, CPI is seeking to establish a Fr

    Awarded to Economic Research Services Limited, Jupiter Consulting Services Ltd, Amion Consulting Limited, Centrifuge Consulting Limited, Urban Foresight Limited, Edge Economics Limited, Oxford Economics Limited, Risk & Policy Analysts Ltd

Top suppliers

Bruker France SAS£400.00k
BPE Design and Support Ltd£181.30k
HPAPI Project Services Limited£181.30k
Beneq OY£181.30k
Anton Paar£181.00k
Solo Containment£181.00k
C. Gerhardt UK Ltd£181.00k
CYGNET ELECTRONICS LIMITED£181.00k